4 Tips to Avoid Accidents with a Cherry Picker

You're probably familiar with the idea of picking cherries, but you may not know that a cherry picker is also used by many other industries. Fortunately, they are very safe devices and can be used safely by anyone who wants to get their hands dirty. However, there are certain safety tips that you should follow when operating one of these machines.

  1. Don't Stand Close to the Top of the Bucket

The first thing to remember when using a cherry picker hire is that you should never stand close to the top of the bucket. If you do so, then you run the risk of getting hit in the face by debris thrown up from below by your machine's bucket. This type of accident can cause serious injuries and even death for workers who are not wearing eye protection. So, if possible, try to find someplace else on your site where you can work without having any debris thrown at you from above.

Another important safety tip that should be followed while working on any cherry picker is wearing eye protection at all times while working with this type of equipment. Make sure the cherry picker has a safety ladder that extends from the ground all the way up to the top of the boom. This will allow you to get on and off the tool without having to climb up manually. If you don't have this feature on your cherry picker, then you should look into getting one that does have it built into it.

  1. Make sure the cable is taut

The most common mistake made by people using a cherry picker is having their cables loose or not tightened properly. This puts too much stress on the boom arm and can cause it to bend or break. You should always make sure that both ends of your cable have been properly tightened before using it again. If one end is loose, then put an extra knot in it so that it won't come undone while working on something above you. Apart from cherry pickers, if you need to hire an excavator, there are a few things you should know before going out to the job site.

The operation of an excavator can be extremely dangerous, so it's important to hire a qualified operator and make sure they have adequate training, safety equipment, and personal protection equipment. For hiring the right excavator, click here.

Most excavators will come with a safety harness that you can use in the event of a fall. However, this doesn't necessarily protect against other hazards like shoring and trenching equipment. You also need to make sure that your excavator operator has experience operating in confined spaces.

  1. Use caution when lowering yourself

Another common mistake made by people using a cherry picker is not taking enough care when lowering themselves down from high places like roofs or ceilings. Always make sure that your seatbelt is securely fastened when operating any kind of vehicle, especially those that weigh more than 1,000 pounds or are more than 25 feet tall!

Always use both hands when operating a cherry picker and keep both feet on the ground at all times while climbing up or down from it. You also shouldn't climb onto or off of one if there are other people nearby who aren't wearing safety gear (gloves, safety glasses etc.) Never operate a cherry picker with one arm or hand holding onto something else like a railing or ladder unless absolutely necessary.

  1. Always wear your safety glasses

Wearing glasses or goggles can help prevent eye injuries from flying debris and other hazards on the job site, so make sure you always wear them when working with a cherry picker or any other heavy equipment. Wearing safety glasses also helps protect your eyes from the sun's glare and UV rays, which can damage your eyesight over time.

Image: Pixabay